Working Principle And Maintenance Of Folder Gluer

1.Working principle and maintenance of folder gluer：working principle

The working principle of the folder gluer is that after the power is turned on, the entire conveyor belt starts to move, and the die-cut semi-finished carton is placed in the paper feeding position of the folder gluer, and the single box piece is automatically set by the conveyor belt according to the paper stop head frame.The good paper feed report is sent to the middle section of the belt (if the semi-finished carton is coated or polished and other surface treatments, after entering the middle section, the corresponding carton can be glued on the inner edge by a glue gun at the same time) .The conveyor belt will transport the carton to the back section and the box-gluing part is pressure-packed.

2.Working principle and maintenance of folder gluer : maintenance 

(1)Machinery should be kept clean and cleaned frequently.

(2)Wipe the mechanical belt with clean water to keep it clean and prevent slipping, especially to prevent it from sticking to the belt. The rubber wheel and rubber box on the bottom of the hook must be cleaned after work every day, otherwise the glue in the glue box will freeze and affect the glue application effect.

(3)The glue box at the gluing part of the folding shall be kept clean and frequently scrubbed.

(4)It is strictly forbidden to speed control when the governor stops, otherwise the belt will be severely worn.

(5)The inner row plate support, shaft and roller shall be cleaned frequently, and mixed with lubricating oil and butter for better effect, which can shake left and right to prevent rust.

(6)It is best to drive slowly before starting the machine to check whether there is any abnormality.