Before using the folder gluer machine,you should determine the position of the paperboard in the feed section. Placing the life of the paperboard on the operation side of the folder gluer machine and aligning the third fold line of the paperboard with the center line of the folder gluer machine. In this way, the left and right directions of the paperboard can be fixed.

Adjust the orientation of the flat paper support rod of the folder gluer machine. The left and right directions of the flat paper support rod of the folder gluer machine correspond to the main and auxiliary paper feed knives one by one, and the front and rear directions are the conveying viewpoints of the conditioning paperboard. The front-to-back adjustment standard of the folder gluer machine is: make the skewed viewpoint of the large-format cardboard be 10-20, and the skewed viewpoint of the small-format cardboard be 15-40. Because the small format paperboard is thin and easy to deform, and the skew point of view is small, it is easy to cause the paperboard to be tortuous and not straight So it is necessary to move the paper carrier forward and increase the skew point of view of the paperboard to achieve a good picture.