When we use the box gluing machine,we should know how to control box pasting process of box gluing machine.There are some tips about how to control box pasting process of box gluing machine.

1.To control box pasting process of box gluing machine,you can take different measures for different processes. For example, for the coated product industry, the penetration of the adhesive can be ensured by using the coated adhesive, grinding the adhesive mouth or molding the dotted line at the adhesive mouth, so as to improve the fastness of the paste box.

2.To control box pasting process of box gluing machine,you should control the coating amount of adhesive. The coating thickness is usually controlled to 0.3mm, which can meet the requirements after being extruded and spread by the belt.

3.To control box pasting process of box gluing machine , you should adjust the paste box pressure. The paste box pressure shall be adjusted according to the thickness of the paper. It is required that after passing through the paste box belt area, no obvious indentation shall be formed on the surface of the carton or the dark reinforcement of the carton shall be crushed, and the dark reinforcement shall not pop up immediately once the RMB is pressed.

4.To control box pasting process of box gluing machine,you should control the drying time of adhesive. For quick drying adhesive, there is no such problem; For slow drying adhesive, sufficient drying time shall be reserved after inspection and packing, and a certain pressure must be given in the box.